CRIMPDEX
Android and iPhone · Tindeq Progressor

Stop guessing how strong your fingers are.

CrimpDex turns a Tindeq Progressor into a proper testing tool. It measures, records and compares. It does not coach, nag, or ask you to sign up for anything.

Free for seven days. One payment after that, no subscription.

CrimpDex home screen showing peak force of 62.1 kg left, 65.7 kg right and 111.0 kg with both hands, with ratios to bodyweight.
2
Baseline tests, guided end to end
4
Training protocols built in
0
Accounts, ads, or trackers
20mm
Edge by default, and any depth you like
Unlimited
Custom protocols you can build
What it does

A measuring instrument, not a fitness app.

Everything here exists to answer one question: is this getting better or not? The numbers are the interface.

01

Live force, three ways

Open the Measure tab, connect the Progressor and read the load straight away, at full sample rate. Watch it as a bar filling to the target line, a trace of the last few seconds, or a dial, and switch mid-set. Set a target as a fixed force or a share of your peak, up to 100 kg or a limit you set yourself. The hand you should be using is spelled out in its own colour.

02

Peak force, properly run

Three maximal attempts with the rest countdowns between them. CrimpDex tracks the live peak through each one and keeps the best. That is your ceiling.

03

Critical force, timed for you

The twenty-four rep protocol at seven seconds on, three off. Your critical force is calculated from the mean of the last six reps, once the curve has flattened.

04

The numbers behind the numbers

Strength to bodyweight. Left and right asymmetry, flagged past 10%. Critical force as a share of peak, with the range it usually sits in.

05

Protocols loaded from your data

A warm-up, max pulls, repeaters, density pulls and critical force intervals, each with a target load computed from your own baseline and an interval timer. Every one of them is editable, so the classics bend to your training rather than the other way round. Turn on pull beeps and CrimpDex beeps when each pull starts and ends, so your eyes stay on the board.

06

Build your own

Hand, edge depth, time under tension, rest, reps, sets and rest between sets. Load as a share of your baseline, ramping across sets, or a fixed weight when you want a specific number. Alternating hands is a setting, not a workaround.

07

Your data, in a file

Back up every test, session, weigh-in, protocol and setting to a single file, and restore it on a new phone. Export your history as a CSV when you want it in a spreadsheet. Both work even after the trial ends.

Screens

Ink, one accent, and the number you came for.

Every hand has its own colour: left in cyan, right in lime and two-handed in violet, or whatever you pick on the wheel. On every screen, every chart, every reading, so you never have to check a legend mid-set.

Home screen with peak and critical force for the left hand, right hand and both hands.
Every baseline on one screenPeak and critical force for each hand and both together, and the ratios that matter.
The Measure tab: a live trace reading 46.0 kg against a 43.0 kg target set with the slider, peak 51.2 kg.
Measure, straight awayConnect and read your force at once. Set a target with the slider, as a fixed force or a share of your peak.
Repeaters running with beeps on: left hand, set 1 of 4, the dial reading 38.9 of a 40.4 kg target, on target.
Which hand, and how hardThe working hand in large type, your force against the target, and a beep when each pull starts and ends.
The Protocols list: warm-up ramp, max pulls and repeaters, each editable.
Every protocol, one listThe classics and your own, all editable, each with a load worked out from your measurements.
Log baseline test screen explaining peak force, with a choice of left, right or both hands.
Tests that explain themselvesWhat each one measures and how long it takes, one hand or both.
History chart of peak force over twelve weeks for the left hand, right hand and both hands.
Watch it moveForce axes start at zero, so a small gain looks like a small gain.
Editing the warm-up ramp: left, right, alternating or both hands, ramping from 30 to 60 percent of peak.
Change anythingHands, load, edge and timing. Ramps evenly across the sets, and a running total of what it adds up to.
Settings: choosing a hand colour on a colour wheel, with six quick picks.
Your coloursPick a colour for each hand on the wheel. Only bright ones, so every reading stays easy to see.
How it goes

Measure once, then train against the number.

01

Pair the Progressor

Bluetooth, no account, no setup wizard. CrimpDex finds it and starts reading.

02

Take a baseline

Peak force takes about ten minutes with the rests. Critical force takes four. Do each hand. No Progressor to hand yet? Type the numbers in from any test.

03

Train against it

Every protocol now knows what your 65% actually weighs. The timer runs the intervals and the bar shows whether you are on target, rep by rep.

04

Retest in a few weeks

Peak force moves slowly. Critical force moves faster. The chart shows both without flattering either.

Your data

Your training data stays on your phone.

Every reading, test and session lives in a private database on your device. There is no account to create and none to delete. The app only goes online to buy or restore the unlock, send a crash report, and check for updates, and none of those carry your data. It leaves the phone only when you make a backup or an export yourself.

No account

Nothing to sign up for

No email, no password, no profile. Install it and start measuring.

No trackers

No analytics, no ads

No advertising or analytics SDK. Crash reports carry the error and the device model, never your measurements.

Your copy

Backed up where you choose

Back up to a file and save it wherever you like. Your phone's own backup, to your Google or Apple account, may also keep a copy. Either way the copy is yours, not ours.Full policy.

Price

Seven days free, then one payment.

No subscription, no renewal, no tiers, and no feature held back for a higher plan. The trial is the whole app.

After the trial
One payment
  • Every feature, during the trial and after it
  • Unlocks permanently against your Google or Apple account
  • Restores on a new phone with the same account
  • Your training data is never held hostage: it stays on the device either way

Free for seven days, then one payment.

Questions

The things people ask first.

Do I need a Tindeq Progressor?

For live measurement, yes. The Progressor is a Bluetooth load cell made by Tindeq, and CrimpDex reads from it directly. Without one you can still enter values by hand from any test and use every protocol, chart and calculation. CrimpDex is not a Tindeq product and is not affiliated with Tindeq.

Does it work without a signal?

Yes. Measuring, testing, protocols and history all run on the device. It only needs a connection to buy or restore the unlock.

What is critical force, and why should I care?

Peak force is the hardest you can pull once. Critical force is the load you can keep coming back to without fading, measured over twenty-four pulls. It usually lands between 35% and 45% of peak. Peak tells you about one hard move; critical force tells you whether you will still be holding on near the top of the route.

Can I train one hand at a time?

Yes. A custom protocol can be left hand only, right hand only, or alternating, where a full set on one hand is followed by the same on the other before the rest between sets.

Can I set a target in kilograms rather than a percentage?

Yes. A custom protocol's load can be a share of your peak force, a share of your critical force, or a fixed weight in whichever unit you have chosen in Settings. Percentages keep up as you get stronger; a fixed weight is there for rehab loads and anything a physiotherapist has written down.

Which phones?

Android 8.0 and later, on a phone with Bluetooth Low Energy, and iPhones on iOS 16.4 and later.

How do refunds work?

The purchase goes through Google Play or the App Store, so the store's own refund process applies. Request one from your Google Play order history or from Apple's Report a Problem page, or email me and I will help sort it out.

Support

One person builds this, and answers the email.

Bugs, a reading that looks wrong, a protocol you cannot express in the builder, or a request to try new versions before they ship. It all goes to the same address.

Email

Get in touch

[email protected]

Say which phone you are on and, if a number looked wrong, what you expected instead.

Privacy

What is collected

None of your training data. Purchases and crash reports, without your name or email.Read the policy.

Deleting data

Uninstall is the delete button

There is no account to close. Removing the app removes the database with it. To clear it without uninstalling on Android, use Clear storage for CrimpDex.